Well-designed White Fused Alumina Powder - Micro Sodium White Fused Alumina – Yufa
Well-designed White Fused Alumina Powder - Micro Sodium White Fused Alumina – Yufa Detail:
Compared With β-Al2O3 And α-Al2O3
Sodium oxide is a harmful impurity to white corundum. It forms β-Al2O3 with alumina in the molten state, and the amount of production increases with the increase of sodium oxide content. Na2O in white corundum mainly appears in the form of Na2O·11AL2O3 (β-Al2O3). For example, if the alumina raw material contains more than 0.6% sodium oxide, the white corundum produced with it will contain more than 10% β-Al2O3.
Compared with β-Al2O3, α-Al2O3 has ‘three highs’. First, it has a high melting point, Secondly a high density, and thirdly a high hardness, as shown in the following table:
| Phase | Chemical compositions | Crystal System | Density (g/cm3） | Micro hardness (Kg/mm²) | Melting point (℃) |
| α-Al2O3 | Al2O3 | Hexagonal | 4.0 | 2300 | 2050 |
| β-Al2O3 | Na2O·11Al2O3 | Trigonal | 3.24 | 1300~1600 | 1600 |
Chemical Composition
| Chemical Composition | Na2O % ≤ | Al2O3 % ≥ | SiO2 % ≤ | Fe2O3 % ≤ |
| Gurantee Value | 0.06 | 99.7 | 0.1 | 0.05 |
| Typical Value | 0.02 | 99.89 | 0.04 | 0.03 |
Advantages
The micro-sodium white fused alumina improves the melting point, particle density, bulk density, flexural strength, compressive strength, true density, hardness and other properties of white corundum products, laying a solid foundation for the product to enter the high-end market.
Applications
It is suitable for processing alloy steel, high hardness steel, high carbon steel and other materials with high hardness and high tensile strength.
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict high quality regulate, reasonable price tag, excellent support and close co-operation with shoppers, we have been devoted to furnishing the best benefit for our buyers for Well-designed White Fused Alumina Powder - Micro Sodium White Fused Alumina – Yufa , The product will supply to all over the world, such as: Leicester, Mauritania, Toronto, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Kay from Indonesia - 2018.09.21 11:44
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Elaine from Cambodia - 2017.09.22 11:32
