New Fashion Design for White Alumina Abrasive - Micro Sodium White Fused Alumina – Yufa
New Fashion Design for White Alumina Abrasive - Micro Sodium White Fused Alumina – Yufa Detail:
Compared With β-Al2O3 And α-Al2O3
Sodium oxide is a harmful impurity to white corundum. It forms β-Al2O3 with alumina in the molten state, and the amount of production increases with the increase of sodium oxide content. Na2O in white corundum mainly appears in the form of Na2O·11AL2O3 (β-Al2O3). For example, if the alumina raw material contains more than 0.6% sodium oxide, the white corundum produced with it will contain more than 10% β-Al2O3.
Compared with β-Al2O3, α-Al2O3 has ‘three highs’. First, it has a high melting point, Secondly a high density, and thirdly a high hardness, as shown in the following table:
| Phase | Chemical compositions | Crystal System | Density (g/cm3） | Micro hardness (Kg/mm²) | Melting point (℃) |
| α-Al2O3 | Al2O3 | Hexagonal | 4.0 | 2300 | 2050 |
| β-Al2O3 | Na2O·11Al2O3 | Trigonal | 3.24 | 1300~1600 | 1600 |
Chemical Composition
| Chemical Composition | Na2O % ≤ | Al2O3 % ≥ | SiO2 % ≤ | Fe2O3 % ≤ |
| Gurantee Value | 0.06 | 99.7 | 0.1 | 0.05 |
| Typical Value | 0.02 | 99.89 | 0.04 | 0.03 |
Advantages
The micro-sodium white fused alumina improves the melting point, particle density, bulk density, flexural strength, compressive strength, true density, hardness and other properties of white corundum products, laying a solid foundation for the product to enter the high-end market.
Applications
It is suitable for processing alloy steel, high hardness steel, high carbon steel and other materials with high hardness and high tensile strength.
Product detail pictures:
Related Product Guide:
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for New Fashion Design for White Alumina Abrasive - Micro Sodium White Fused Alumina – Yufa , The product will supply to all over the world, such as: Jamaica, Istanbul, Brunei, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By John biddlestone from Malawi - 2018.02.04 14:13
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Gustave from Paraguay - 2018.09.21 11:01
